Pre - Filled Transformer Epoxy Resin Casting Fast Cure Liquid For Dry Transformer
Introduction Established in 1998, Jiangte Insulation Composite Co., Ltd is high-tech enterprise engaging in the development, production and sale of electrical epoxy resin. After more than 30 years of efforts, JiangTe has introduced a variety of electrical epoxy resin products which have been widely used in the manufacturing of dry type transformers, instrument transformers, medium to high voltage insulation parts and solid switchgears. To provide the very best service, Jiangte has set up two production plants in Hubei and Guangdong producing more than 50 electrical epoxy resin line with an annual capacity exceeding eighty thousand (80000) tons. JiangTe is the most professional and the leading manufacturer of electrical epoxy resin in China. JiangTe's two plants have received the ISO9001 quality system certification and ISO14001 environmental management system certification and are careful to meet all local and international health, environment and safety standards. Additionally , JT has established a comprehensive Research and Development Center with a large selection of advanced testing equipment for their highly skilled research and production teams.
- Details
-
Epoxy Electrical Insulation System
JT 6101 Organic Silicon Mould Release agent
Good release effect Features
high stability
No reaction with the casting material
Not corrode the mold
Environment protection and without pollution
1. Remove grease and wax thoroughly with solvent to ensure the mould cavity clean and dry
2. For the new mould, initial using need to spray for 3-4times(After the solvent evaporation and then spray brush again),after that one mould to spray one time or several moulds to spray one time(several moulds to spray one time: normally paint one time after the mould poured 2～10 times)
3. When a thin coating can be formed on the surface of the mold cavity by the method of spraying or brushing, then it is ok
Process
Hubei Jiangte Insulation Composite Guangdong Jiangte Insulation Composite Add:No.219,Zhanghua Rd(N),Economic & Development Add:Rm1204, No.662, Huangpu Middle Ave.
Zone of Qianjiang City, Hubei Province, China. Tianhe Distric, Guangzhou,China..
Tel:+86-728-6201068 Tel:+86-20-82320316
Fax:+86-728-6202066 Fax:+86-20-82315407
Performance parameters
Aspect
Unit
Value
colour and lustre
—
Transparent liquid
Viscosity
mPa.s
15
Flash point
℃
65
Spread rate
㎡
20-25
Density
g/mm3
0.90-0.92
Packing
5KG/ pot，20kg/drum
Storage
Products need to be stored in a dry and ventilated environment with 18-40℃, and the shelf life is 1 year
Related Products
Product Message
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
*Note: Please be sure to fill in the information accurately and keep the communication open, we will contact you as soon as possible
Contact
E-mail: louis@jt-resin.com
Headquarter: Tel:+86-20-82320316 Fax:+86-20-82315407
Hubei: Tel:+86-728-6201068 Fax:+86-728-6202066
Guangdong: Tel:+86-752-6267676 Fax:+86-752-6267979
CopyRight © 2023 Jiangte lnsulation Composite Co., Ltd.